「长春伸缩门厂家」不锈钢伸缩门电机不动的原

作者:白城伸缩门定做   时间:2019-07-13 14:23



「长春伸缩门厂家不锈钢伸缩门电机不动的原因

 

Reasons for the Stainless Steel Telescopic Door Motor of Changchun Telescopic Door Manufacturer
 



1。阀门卡死,可能是因为反向旋转和限位开关调整不当造成的。贵州自动伸缩门的维修方法是,当阀门打开时,不锈钢伸缩门,在手轮操作中的锤击机构可以打开卡住的阀门。
 

1. Valve jam may be caused by reverse rotation and improper adjustment of limit switch. The maintenance method of Guizhou automatic telescopic door is that when the valve is opened, the stainless steel telescopic door and the hammering mechanism in handwheel operation can open the clamped valve.
 

2。电机停止运行,直到阀门就位。原因是行程控制器调整不好,扭矩控制器提前动作。
 

2. The motor stops running until the valve is in place. The reason is that the travel controller is not adjusted well and the torque controller moves ahead of time.

 

松原铝合金伸缩门厂家



3。执行器旋转但不驱动阀门。原因是离合器杆锁定在“手动”位置,吉林伸缩门,动轴套位置不对。解决方案包括离合器敲击“远程钻孔”和轴套位置正确。
 

3. The actuator rotates but does not drive the valve. The reason is that the clutch rod is locked in the "manual" position, Jilin expansion door, and the position of the moving axle sleeve is not right. Solutions include clutch tapping "remote drilling" and correct shaft sleeve position.
 

4。电机工作不正常,有持续的嗡嗡声。主要是因为两相运行,唯一的设施就是检查连接到三相的电源电路。
 

4. The motor is not working properly and there is a constant buzz. Mainly because of the two-phase operation, the only facility is to check the power supply circuit connected to the three-phase.
 

5。扭矩和行程开关不会失控。引起根部相序连接故障,线路连接故障,接触器吸铁不释放。解决方法是改变电机的相序,检查电路以纠正错误,洁净或更换接触器。


5. Torque and stroke switches are not out of control. Causes the root phase sequence connection fault, the line connection fault, the contactor iron absorption does not release. The solution is to change the phase sequence of the motor, check the circuit to correct errors, clean or replace contactors.


「长春伸缩门厂家」不锈钢伸缩门电机不动的原因
 

Reasons for the Stainless Steel Telescopic Door Motor of Changchun Telescopic Door Manufacturer
 

电动伸缩门偏差
 

Electric telescopic door deviation
 

1。倾斜或不平的外观不适用安装电动伸缩门。安装电动伸缩门时,首先要检查地形,然后确定电动伸缩门的安装方式和方式。
 

1. Inclined or uneven appearance is not suitable for installing electric telescopic door. When installing the electric telescopic door, first check the terrain, and then determine the installation mode and mode of the electric telescopic door.

 

白城伸缩门厂家



2。电动伸缩门电机链条松动。如果电机链条松动,我们可以找专科的维修人员来修理。然后我们可以看到电机控制系统是否有任何问题。主要取决于电机控制系统的参数。这些信息的参数可以找到您购买的电动伸缩门的制作商。
 

2. The motor chain of the electric telescopic door is loose. If the motor chain is loose, we can find specialist maintenance personnel to repair it. Then we can see if there are any problems with the motor control system. It mainly depends on the parameters of the motor control system. The parameters of this information can be found by the manufacturer of the electric telescopic door you purchased.


3。电动伸缩门的门体相对较紧,这可能是因为门体装配不良和操作不良造成的。此时,吉林伸缩门,我们可以看到电动伸缩门的门体的松紧度、门头板的重量,以及一些厂家偷工减料制作的伸缩门,导致电动伸缩门门头牵引重量损失。


3. The door body of the electric telescopic door is relatively tight, which may be caused by poor assembly and operation of the door body. At this time, Jilin telescopic door, we can see the tightness of the electric telescopic door body, the weight of the door head plate, and some manufacturers jerry-built telescopic door, resulting in the loss of traction weight of the electric telescopic door head.