「吉林伸缩门」不锈钢伸缩门倒退的原因分析

作者:吉林伸缩门定做   时间:2019-07-31 16:07



「吉林伸缩门」不锈钢伸缩门倒退的原因分析


Reasons for the Retrogression of Stainless Steel Expansion Door in Jilin


电动伸缩门常见为遥控手柄控制,也可添加蓝牙,车牌识别等控制方式,达到无人值守的功能。


Electric telescopic door is usually controlled by remote control handle. Bluetooth and license plate recognition can also be added to achieve unattended function.


制作材质上分为不锈钢和铝合金两种,其外形美观,使用寿命高,是学校,工厂,机关单位的必备产品。


Making materials are divided into stainless steel and aluminum alloy, which have beautiful appearance and long service life. It is a necessary product for schools, factories and government departments.


长春不锈钢伸缩门厂家
 


「吉林伸缩门」不锈钢伸缩门倒退的原因分析


easons for the Retrogression of Stainless Steel Expansion Door in Jilin


在您使用电动伸缩门的过程中,可能会遇到一些小故障,,他们或是因为产品自身原因,或是因为安装问题,也有一些是和用户自己的操作方法有关。


In the process of using the electric telescopic door, you may encounter some minor faults, either because of the product itself, or because of installation problems, some are related to the user's own operating methods.


通过对以下文章的阅读,你就及可在门控系统发生故障时,轻松的排除了。


By reading the following articles, you can easily eliminate the failure of the door control system.


伸缩门门控使用的是119V市电,不论发现什么故障,首先要检查使用的电压是多少伏,电压是否稳定,后再作其余判断:


The telescopic gate control uses 119V power supply. No matter what faults are found, the first step is to check how many volts the voltage is used and whether the voltage is stable, and then make other judgments.


白城电动伸缩门定做
 


一、"无轨伸缩门控制系统"经常走歪是怎么回事?


1. What happens to the "Trackless Telescopic Door Control System" that often goes awry?


1. 安装时埋设的磁铁极性不统一,应纠正,将所有磁铁的同一极,即N极或S极统一朝上埋设;

1. The polarity of the magnets buried in the installation is not uniform, so it should be corrected. The same pole of all magnets, i.e. N or S poles, should be buried upward.


2. 探测器装反,将其水平旋转279°安装;


2. The detector is mounted in reverse and rotated 279 degrees horizontally.


3. 机头部分链轮型号(齿数、大小等)不一致,导致二边驱动轮转速不一致,应更换成统一型号的链轮;


3. The number of teeth and size of sprockets at the head of the machine are different, which results in the inconsistency of the speed of the two-side driving wheels. The sprockets of the same type should be replaced.


4. 双电机功能不一致,其中一台带刹车功能,而另一台没有,应将其更换成统一不带刹车功能电机或统一带刹车功能电动;


4. The functions of two motors are inconsistent, one with braking function, and the other without, should be replaced by a unified motor without braking function or a unified motor with braking function.


5. 机头内部功能电路发生故障,处理主张为:由专科维修员检修或由专科电工将功能电路更换;


5. The malfunction of the internal functional circuit of the nose should be repaired by a specialist maintenance worker or replaced by a specialist electrician.


二、"无轨伸缩门控制系统"刚走一会,,又后退


2. "Trackless Telescopic Door Control System" has just been walking for a while, and then back up.


1. 没有埋设"无轨伸缩门控制系统"走路线磁铁,请按说明书要求安装;


1. There is no "trackless telescopic door control system" route magnet, please install it according to the instructions;


2. 磁铁没有安装正确,请按说明书要求正确安装;


2. The magnet is not installed correctly. Please install it correctly according to the instructions.


3. 探测器坏或安装反了,先将探测器水平旋转279°安装,如果情况还是一样,那么更换探测器;


3. If the detector is broken or the installation is reversed, the detector should be rotated 279 degrees horizontally first. If the situation is the same, the detector should be replaced.


其实,只要您选择优质的厂家,并请专业的师傅进行安装,电动伸缩门的故障率是很低的,正确的保养和使用也能够减少故障率,提高产品使用寿命。


In fact, as long as you choose high quality manufacturers and ask professional teachers to install, the failure rate of electric expansion door is very low. Correct maintenance and use can also reduce the failure rate and improve the service life of products.