宏创铝合金伸缩门_hc8号

作者:杨经理   时间:2019-04-29 10:51

宏创铝合金伸缩门_hc8号



产品名称:电动伸缩门


材质:铝合金


型号:宏创铝合金伸缩门_hc1号


高度:1800mm


总宽度:990mm


轮中尺寸:1024mm


材料说明:


主料:90*60   中柱料: 120*40,

怎么处理伸缩门突然不动?


1。阀门卡死,可能是由于反向旋转和限位开关调整不当造成的。贵州自动伸缩门的维修方法是,当阀门打开时,在手轮操作中的锤击机构可以打开卡住的阀门。


2。电机停止运行,直到阀门就位。原因是行程控制器调整不好,扭矩控制器提前动作。


3。执行器旋转但不驱动阀门。原因是离合器杆锁定在“手动”位置,动轴套位置不对。解决方案包括离合器敲击“远程钻孔”和轴套位置正确。


4。电机工作不正常,有持续的嗡嗡声。主要是由于两相运行,唯一的办法就是检查连接到三相的电源电路。


5。扭矩和行程开关不会失控。引起根部相序连接故障,线路连接故障,接触器吸铁不释放。解决方法是改变电机的相序,检查电路以纠正错误,清洁或更换接触器。




How to debug the newly purchased electric telescopic door control system



Generally speaking, the newly purchased electric telescopic door needs to be debugged after installation, so as to ensure the normal use of the electric telescopic door. But how should its control system be debugged?


1. Make the electric telescopic door in a half-open state, close the clutch and turn on the power supply.


2. Adjust the vertical distance between the position detection switch and the ground, so that the door can automatically correct deviation during operation. Operate with a small transmitter, press the "open" button, and the door should run in the direction of opening.


3. Press the "close" button and the door should run in the direction of closing.


4. Press the stop button and the door should stop running.


5. When closing the door, if there are obstacles in front of the anti-collision switch, the door stops running and runs in the direction of opening the door. If there is a deviation action opposite to the direction of the telescopic door, the left and right motor wires will be aligned.