宏创铝合金伸缩门_hc7号

作者:杨经理   时间:2019-04-29 10:51

宏创铝合金伸缩门_hc7号

产品名称:电动伸缩门


材质:铝合金


型号:宏创铝合金伸缩门_hc7号


高度:1600mm


总宽度:990mm


轮中尺寸:1004mm


材料说明:


主料:90*60   中柱料: 40*40, 底梁:40*40

新买的电动伸缩门控制系统如何调试


 一般来说,新购买的电动伸缩门在安装好之后是需要进行调试的,这样才能保证电动伸缩门的正常使用。可是,它的控制系统应该怎样调试呢?

一、使电动伸缩门处于半开状态,合上离合,接通电源。
                                     
二、调整位置检测开关与地面的垂直距离,使门运行过程中能够自动纠偏,用小发射器操作,按“开”按钮,门应朝开门方向运行。

三、按“关”按钮,门应朝关门方向运行。

四、按“停”按钮,门应停止运行。

五、关门时,若防撞开关前有障碍物时,门停止运行,并向开门方向运行,若出现纠偏动作与伸缩门的偏离方向相反时,将左右电机线对调。





How to debug the newly purchased electric telescopic door control system



Generally speaking, the newly purchased electric telescopic door needs to be debugged after installation, so as to ensure the normal use of the electric telescopic door. But how should its control system be debugged?


1. Make the electric telescopic door in a half-open state, close the clutch and turn on the power supply.


2. Adjust the vertical distance between the position detection switch and the ground, so that the door can automatically correct deviation during operation. Operate with a small transmitter, press the "open" button, and the door should run in the direction of opening.


3. Press the "close" button and the door should run in the direction of closing.


4. Press the stop button and the door should stop running.


5. When closing the door, if there are obstacles in front of the anti-collision switch, the door stops running and runs in the direction of opening the door. If there is a deviation action opposite to the direction of the telescopic door, the left and right motor wires will be aligned.